Skip to main content
Rough Stage · Whole-Apartment Scope

Rough Apartment Renovation in Kyiv: Electrical, Plumbing, Plastering, Screed

We work comprehensively by whole-apartment scope. We do not handle emergency call-outs, one socket, one faucet, or minor repairs in a single room.

Calls daily 9:00 AM–8:00 PM

2014

Apartment renovation experience since

4 stages

Electrical, plumbing, plaster, screed

48 hr

Estimate after apartment inspection

Docs

Hidden-work photo records

Professionally assembled consumer unit with labeled circuits — part of KyivReno rough apartment renovation in Kyiv
Plumbing utility room with manifold, water heater, and pipework — apartment plumbing rough-in in Kyiv
Level plastered walls and clean floor screed — apartment prepared for finish coatings

Renovation Packages: Transparent Pricing & Terms

Labor Only

from
from 6,000 UAH/m²
after apartment inspection
  • One stage: electrical, plumbing, plastering, screed, waterproofing
  • Materials are owner-supplied or priced as a separate block
  • Scope and sequence are fixed in the contract before start

First we confirm the scope fits a full rough-work package.

Labor + Rough Materials

Most popular
from
around 12,000 UAH/m²
exact total in the estimate
  • Estimate includes cable, pipes, mixes, fixings, waterproofing when needed
  • Finishes not included: tile, sanitaryware, flooring, lights, decor
  • After inspection, labor and materials are shown separately

Indicative price: apartment condition, layer thickness, number of wet zones, and engineering complexity can change the budget.

First we confirm the scope fits a full rough-work package.

Rough budget calculator

Enter apartment area and choose a package. We show a starting-point estimate using starting price × m².

Package
Estimated budget
720,000
60
12,000 UAH/m²
Formula: 60 m² × 12,000 UAH/m²
Plumbing utility room with manifold, water heater, and pipework — apartment plumbing rough-in in Kyiv
Dedicated page

Rough Apartment Renovation in Kyiv: Electrical, Plumbing, Plastering, Screed

We work comprehensively by whole-apartment scope. We do not handle emergency call-outs, one socket, one faucet, or minor repairs in a single room.

The exact estimate depends on apartment condition, utilities, layout, and materials. After inspection, we lock the total in the contract.

How we verify the rough-work scope

1

We filter out spot tasks

We confirm you need a whole-apartment package, not a one-hour trade visit.

2

We inspect utilities

We assess inputs, risers, panel, wet zones, levels, and hidden-work sequence.

3

We split labor and materials

We show where it is labor only and where rough materials and delivery are needed.

Apartment Portfolio with Full-Scope Renovation

Included / Not Included

This offer is for owners who need a full rough-work stage across the apartment, not a one-hour handyman visit. We coordinate adjacent trades as one team so electrical, plumbing, plastering, screed, and wet zones do not conflict.

Included in the package:
  • Electrical rough-in: cable routes, back boxes, consumer unit, lighting groups, and power lines across the apartment
  • Plumbing rough-in: water and drainage distribution, manifolds, concealed carriers, and system pressure testing
  • Wall and ceiling plastering with flatness control for the following finish stage
  • Laser-levelled floor screed, perimeter damper tape, and reinforcement when needed
  • Waterproofing for wet zones, shower niches, bathrooms, and utility assemblies when needed
Not accepted as a standalone call-out:
  • Emergency electrician or plumber call-outs
  • Replacing or installing one socket
  • Replacing one faucet, mixer, or siphon
  • Small repairs in one room without a whole-apartment scope
  • Spot appliance installation or hookup

If you need a full rough-work stage for an apartment, we take responsibility for sequencing, engineering compatibility, and finish-stage readiness.

How we work

01

Apartment Inspection

An engineer visits the property, checks walls, floors, electrical input, water and drainage risers, and records building constraints and lift access.

02

Scope Definition

We agree which rough works your apartment needs: electrical, plumbing, plastering, screed, wet-zone waterproofing, and preparation for final finishes.

03

Estimate & Contract

We prepare a detailed estimate with labor and materials, agree the stage schedule, and lock the approved scope in the contract before work starts.

04

Photo Report & Handover

Before concealment, we photo-record routes, assemblies, waterproofing, and levels. We hand over the apartment with hidden-work documents and readiness for the finishing stage.

What You Receive After the Rough Stage

The result of rough renovation is not separate electrician and plasterer visits, but a prepared apartment where engineering routes are documented, surfaces are ready for finishing, and the next finish stage is clear.

Ready Engineering

Cables, pipes, manifolds, panels, carriers, and wet zones are completed in the right sequence before plaster or screed covers them.

Level Surfaces

Walls, ceilings, and floors are prepared for finish materials with control of geometry, corners, layer thickness, and drying.

Clear Handover

We provide photos of hidden routes, documents, the completed-work list, and recommendations for the next finishing stage.

What a Quality Rough Stage Looks Like

Nine hand-picked examples from the trade-specific pages: electrical work, plumbing, plastering, and screed. This is not a hero repeat, but the work detail that matters before finishes cover it.

Perfectly straight power cable routing along the apartment ceiling
Aesthetics and reliability of cable runs
Installation of low-voltage and power panels for modern housing
Separation of power and internet lines
Ready-to-use premium Schneider Electric consumer unit
Reliable panel based on Schneider Electric
Paired hot/cold Grohe manifold with pumps and pressure gauges
Manifolds with pressure control
Underfloor heating loops of red PEX on mesh before screed pour
Underfloor heating with even loop spacing
Concealed Geberit carrier frame for a wall-hung toilet
Geberit carrier for wall-hung toilets
PFT plastering machine with the crew working on site
PFT station — homogeneous mix
Checking fresh plaster geometry with a long straight-edge near the ceiling
Straight-edge check on fresh plaster
Crisp screed edge around a sunken recess lined with aerated block and waterproofing
Crisp screed edge at the recess

More of our electrical work

Actual sites in Kyiv: consumer units, cable runs, concealed wiring, and backup power. Swipe through for details.

  • Modern consumer unit with comprehensive protection, Kyiv

  • Aesthetics and reliability of cable runs

  • Separation of power and internet lines

  • Reliable panel based on Schneider Electric

  • Schneider with numbered bus

  • Eaton with labeled breakers

  • Multi-row panel, fully wired

  • Color-coded jumpers and relays

  • Same panel, alternate angle

  • LED drivers with a circuit schedule

  • Route planning before chasing

  • Recessed panel on a brick wall

More of our plumbing work

Manifolds, pressure-tested runs, concealed carriers, and boiler rooms — actual assemblies on our Kyiv sites.

  • Turnkey utility room in a Kyiv apartment

  • Manifolds with pressure control

  • Underfloor heating with even loop spacing

  • Geberit carrier for wall-hung toilets

  • Boiler room + underfloor loops

  • Valve station on a brick wall

  • Assembly in the utility room

  • PEX supply lines under the ceiling

  • Manifold with circulation pump

  • PEX lines fanning from the manifold

More of our plastering work

Machine application, straight-edge flatness checks, screed, and transitions to brickwork — real work on our Kyiv sites.

  • Room ready for finish coatings, Kyiv

  • PFT station — homogeneous mix

  • Straight-edge check on fresh plaster

  • Crisp screed edge at the recess

  • Machine-spraying up near the ceiling

  • Straight-edge check on the ceiling

  • Freshly plastered room

  • Transition to exposed brickwork

  • Finished screed toward the window

Frequently Asked Questions

What is included in rough apartment renovation?

The baseline package includes electrical rough-in, plumbing rough-in, plastering, screed, and wet-zone waterproofing when needed. The exact list depends on apartment condition, layout, number of bathrooms, flooring type, and finish-stage requirements.

How long does rough apartment renovation take?

For a typical 40–60 m² apartment, the rough-work package usually takes 4–8 weeks. Timeline depends on demolition, number of wet zones, plaster and screed thickness, material drying, and technical decisions approved before the start.

How is the rough-work estimate formed?

After inspection, we calculate labor and materials in separate blocks: electrical, plumbing, plastering, screed, waterproofing, preparation, and related costs. The approved scope is locked in the contract, and changes are documented only through an addendum.

Do you photo-record hidden works?

Yes. Before plaster, screed, or tiling covers anything, we record cable routes, pipes, manifolds, carriers, waterproofing, and control levels. This helps with safe drilling, furniture installation, and engineering maintenance after renovation.

Can I order only an electrician, plumber, or plasterer?

For this offer, no: it is about comprehensive rough apartment renovation. We do not take emergency call-outs, one socket, one faucet, one appliance hookup, or small repairs in one room. If the scope covers the whole apartment, we can estimate it as a standalone trade stage.

Need the Rough Stage for a Whole Apartment?

Call or message us on Telegram. We will quickly filter out spot tasks, confirm whether your scope fits, and prepare an estimate after inspecting the apartment.

Call Us · +380 (97) 607-15-15

Calls daily 9:00 AM–8:00 PM